UGARITIC DRAW is a distinguished provider of architectural and civil engineering design solutions, specializing in premium project packages that cater to the diverse requirements of the engineering and construction industry. Our comprehensive servic...

Project Image
QC.29 Sieve Analysis

1. Brief Description of the Report

The document is a standardized laboratory calculation datasheet designed to log aggregate physical mass retention across vertical stacks of nested standard sieves [nhis1A]. It consists of the following key sections:

  • Sampling & Procurement Header: Entry fields to document the specific type of aggregate (Material), its geographical source (Source), the commercial Supplier, the Sampling Date, and the formal Date of Analysis [nhis1A].
  • Raw Weight & Moisture Parameters (DATA): Specific mathematical lines to log critical base measurements, including:
    • Wt. of Sample Dry: Total weight of the dry sample before testing [nhis1A].
    • Wt. of Sample dry after wash: Mass retained after washing the sample over a fine mesh to remove clays [nhis1A].
    • Percent Moisture: Calculated water content within the raw batch [nhis1A].
    • Wt. of wet sample and Wt. Before Wash [nhis1A].
  • Gradation Sieve Matrix (The Core Table): A multi-row data grid listing standardized sieve opening sizes per American standards (ASTM E.11), arranged from largest openings (\(1\ \frac{1}{2}\text{''}\ /\ 37.5\text{ mm}\)) down to ultra-fine meshes (No. 200 / 75 Um) and the final bottom catch-bucket (Sieving Pan) [nhis1A]. Each sieve row measures:
    • Wt. Retained on Sieves: The exact mass of material trapped on that specific screen [nhis1A].
    • Percent Retained: The proportional percentage of mass trapped relative to total sample weight [nhis1A].
    • Percent Passing: The cumulative percentage of material fine enough to pass through that screen level [nhis1A].
    • Specification: The pre-approved engineering project limit envelopes used for compliance grading [nhis1A].
  • Remarks & Geotechnical Validation: A text section for general technical notes (Remarks), followed by mandatory verification sign-offs requiring signatures and dates from the Contractor Representative, Q.C. Inspector, and Consultant acting as the official site witness [nhis1A].

2. Purpose of the Report

The primary purpose of this report is to scientifically evaluate and document the grain size distribution of aggregates or soils, verifying that their gradation matches standard engineering boundaries to guarantee optimal concrete strength or backfill compaction. Its core objectives include:

  • Securing High-Strength Structural Concrete: Verifying the proper blend of coarse gravel and fine sand ensures that smaller grains perfectly fill the empty pockets between larger stones, minimizing air voids, which directly increases concrete compressive strength and optimizes cement-water consumption.
  • Validating Structural Earthwork Compaction Performance: Determining the exact fine-to-coarse ratio of soil ensures it can be successfully compressed and mechanically compacted in the field without risk of future differential settlement under building foundations or road pavements.
  • Filtering and Rejecting Out-of-Specification Deliveries: Comparing the calculated Percent Passing curves against the approved Specification columns allows engineers to immediately reject aggregate deliveries that contain high fractions of silt, dust, or structural clay (trapped at or below Sieve No. 200).
  • Material Certification & Archival Records (Distribution): Preparing a binding material compliance certificate distributed among the Construction Manager, Consultant, and Contractor to update the final project closeout handover files [nhis1A].

Project Information

Start From

EGP 1199

Login to Download
Available Plans
Civil Elilte
Project Name
QC.29 Sieve Analysis
Technology
Excel
Download
Instant After Purchase